Smart+ Products SPP1500SBH Owner's Manual

Digital quartz infrared heater

Advertisement

Quick Links

DIGITAL QUARTZ INFRARED HEATER
OWNER'S MANUAL
Model No.: SPP1500SBH
PLEASE SAVE THESE INSTRUCTIONS
WARNING: READ THIS OWNER'S MANUAL CAREFULLY BEFORE USE

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the SPP1500SBH and is the answer not in the manual?

Questions and answers

Summary of Contents for Smart+ Products SPP1500SBH

  • Page 1 DIGITAL QUARTZ INFRARED HEATER OWNER’S MANUAL Model No.: SPP1500SBH PLEASE SAVE THESE INSTRUCTIONS WARNING: READ THIS OWNER’S MANUAL CAREFULLY BEFORE USE...
  • Page 2: Important Instructions

    Thank you for choosing the Smart+ Products Digital Quartz Infrared Heater. This owner’s manual will provide you with valuable information necessary for the proper care and maintenance of your new product. Please take a few moments to thoroughly read the instructions and familiarize yourself with all the operational aspects of your new heater.
  • Page 3: Specifications

    SPECIFICATIONS Voltage Rating 120 V (60Hz) Power Consumption 1000/1500W (12.5 Amps), 5120 BTUs Unit Size 325x190x314mm / 12.8x7.5x12.4 inches Unit Weight 5.2kgs / 11.5lbs SAFETY FEATURES Tip-Over Safety Feature This heater is equipped with a tip-over safety feature. Once the heater is tipped over, an internal switch will automatically shut the heater off.
  • Page 4: Control Panel

    PRODUCT DIAGRAM Remote control hider Plastic Cabinet Control Panel Air Outlet Air Intake Temperature sensor Power Switch Control Panel...
  • Page 5: Remote Control

    1、Fahrenheit / Celsius Indicator: indicates when Fahrenheit / Celsius mode is on. 2、Lock Indicator: indicates when Lock mode is on. 3、Digital display: Normal ambient temperature display, temperature control and display flashing when regulating the temperature shut down when the track 60 seconds countdown, timer time display 1-12H, a sleep timer and alarm function to POWER. 4、Remote Indicator: indicates when Remote mode is on 5、Energy-Saving Function Indicator: indicates when energy-saving mode is on.
  • Page 6 PREPARATION Place the heater on a firm, level surface and plug into a grounded 120V 60Hz power outlet. Only operate this heater in upright position with feet attached. When using remote control, please pull out the clear insulating film to activate the battery as shown below. MAINTENANCE Unplug the unit and let it cool completely.
  • Page 7 NOTE: The heater may not operate if the thermostat is set higher than the ambient room temperature. To begin operation, increase the thermostat temperature setting on the heater using the control panel buttons or remote control buttons. Smart+ Products – New Holland, PA www.smartplusproducts.com...

Table of Contents