Toshiba Satellite P200 Series User Manual page 189

❖
❖
❖
❖
❖
❖
Downloaded from LpManual.com Manuals
If another computer is on the same network, verify that it has
network access, and can connect to the Internet. If, for
example, the other computer cannot browse to a public Web
site, the ISP's (Internet Service Provider) service may be
disrupted.
Verify that the Service Set Identifier (SSID), or network name,
is correct—i.e., that it matches the SSID assigned to the access
point you are attempting to connect through. SSIDs are case-
sensitive. Toshiba provides a Client Manager utility for setting
and managing SSIDs.
Check the Control Panel's Hardware and Sound Device
Manager to verify that the Wi-Fi
®
Windows operating system, and that the driver is loaded.
Carefully note any error messages—these will be very helpful
if you should confer with a support technician at a later time.
Verify that the network connection is configured to obtain its
Internet Protocol (IP) address dynamically:
1 Click Start, and then Network.
2 Click View Status.
3 Click Details.
4 Verify that the DHCP Enabled setting is set to Yes.
5 Click Close.
Use IPCONFIG to verify that the computer has a useful IP
address—one other than the private address of
169.254.xxx.xxx assigned by Windows
1 Click Start to open the Start menu.
2 Type in the search field.
Cmd
3 At the top-left of the Start menu, click
command prompt.
4 Enter IPCONFIG /ALL
The IP address for each active network adapter will be
displayed.
Connect your computer directly to your router or broadband
modem, by plugging a standard CAT5 Ethernet patch cable
(sold separately) into your computer's RJ45 Ethernet port. If
your connection problem disappears, the problem lies in the
®
Wi-Fi part of your network.
If Something Goes Wrong
Resolving a hardware conflict
®
adapter is recognized by the
and press Enter
189
®
.
cmd.exe to open the
.