Using And Configuring Hibernation Mode - Toshiba Satellite P200 Series User Manual

Restarting your computer
To start the computer up again, press the power button until the
on/off light glows blue.
If you turn off the computer by closing the display panel, you can
start it again by opening the display panel.

Using and configuring Hibernation mode

To turn off the computer using the Hibernation command:
1
Start
(Sample Image) Shut Down menu
2
Configuring Hibernation mode options
You can place the computer into Hibernation mode by either
pressing the power button or closing the display panel. You can also
specify an amount of time after which the computer automatically
goes into Hibernation mode.
To use any of these methods, you first need to enable them using the
Power Options feature.
1
Downloaded from LpManual.com Manuals
Click Start, and then click the arrow next to the Lock button in
the lower-right part of the Start menu.
The Shut Down menu appears.
Click Hibernate.
The computer saves the state of all open programs and files,
turns off the display, and then turns off.
Click Start, Control Panel, System and Maintenance, and
then Power Options.
The Power Options window appears.
Getting Started
Turning off the computer
Arrow
77
Shut Down Menu