Directing the display output when you turn on the computer
Once you have connected an external display device, you can
choose to use the internal display only, the external device only, or
both simultaneously. The quickest way to change the display output
settings is to use the display hot key (
1
2
(Sample Image) Display options window
NOTE
3
Downloaded from LpManual.com Manuals
Press
and
simultaneously.
Fn
F5
While holding down
you want takes effect. Briefly pause each time you press the
key to allow time for the display to change.
This hot key cycles through the settings in the following order
(the options for external monitor and TV are available only if
an external monitor or TV is connected):
❖
Built-in display only
❖
Built-in display and external monitor simultaneously
❖
External monitor only
❖
Built-in display and TV (or other external video device)
simultaneously (available on certain models)
❖
TV (or other external video device) only (available on
certain models)
❖
Built-in display and external monitor (extended desktop)
❖
Built-in display and TV (extended desktop) (available on
certain models)
The dual display modes (internal display and external device) cannot
be used while you are watching a DVD.
Release the
Fn
key.
Getting Started
Using external display devices
+
Fn
Fn
, press
F5
repeatedly until the setting
):
F5
69
F5