Speed Dialing; Memory Status; My Number; Messages - MTS Systems Buzz X121 User Manual

did not set someone as default you will call the contact of the first number.
Send message: Edit and send a message to the current number.
Delete: Delete the current contact.
Copy to R-UIM/Phone: Copy the current contact from R-UIM card to
Phone or copy it from Phone to R-UIM card.
Move to R-UIM/Phone: Move the current contact from R-UIM card to
Phone or move it from Phone to R-UIM card.
Add to Blacklist: Add the current contact into the blacklist. Once any
contact is added to blacklist then someone and press OK key to delete.

5.1.1 Speed Dialing

From the idle screen select [Menu/ Contacts/Speed dialing] to edit
numbers of 1-9. If the key does not set press Left Soft key/OK key to add
numbers from Phonebook otherwise press Left Soft key to display the
submenu: View, Edit, Assign and Remove.
View: View the set numbers.
Edit: Edit the set numbers.
Assign: Enter the phonebook and select a number again.
Remove: Erase the set numbers.

5.1.2 Memory Status

From the idle screen select [Menu/ Contacts/Memory status] to view
the capacity of R-UIM and Phone.

5.1.3 My Number

From the idle screen select [Menu/ Contacts/my number] to View,
Edit and Save your R-UIM number.
5.2

Messages

5.2.1 Messages
Write Message
From the idle screen select [Menu/Messages/Messages/Write
Message] to the edit interface, please refer to "text input" in edit operation.
Page 17 of 40