Conference Call; Answer A Call; During Conversation - MTS Systems Buzz X121 User Manual

3.2.4 Conference Call

During the conversation input the third number from the phonebook
or input the numbers by the keypad directly. And then create the
conference call by accessing options, press Send key to begin it after the
third one answer the call.
 Notes
（1）If the contact has several numbers you can set someone as default
and so when you dial the contact it will dial the set number. If you did not
set someone as default you will call the contact of the first number.
（2）Before you use the Conference Call please confirm that the local
network support this function and the R-UIM card opened this function too.

3.3 Answer a Call

When you have an incoming call your phone rings or vibrates
depending on the parameters you choose. However if the number has
been stored in the phonebook, the caller's name will be displayed.
You can press Send key to answer it or you can answer it by other
ways that you can set the answer mode in [Menu/Settings/Call
settings/Answer mode] otherwise you can press End key to reject it.

3.4 During Conversation

During the active call press Left Soft key to display the submenu: H-
Free /H-Held, Mute/Unmute, Contacts and Messages.
H-Free/H-Held: You can open or cancel the hand-free function.
Mute/Unmute: After you set Mute the partner cannot listen your voice.
And then select Unmute to reset it.
Contacts: Enter the Phonebook and view the contacts.
Messages: Enter the message interface to execute some operations.
.
Page 15 of 40