Setting Transmission Methods For Audio Input To The Acc2 Connector - Kenwood TS-590S Setting Manual

4.4. Setting Transmission Methods for Audio Input to the ACC2 Connector

The PTT of the microphone connected to the TS-590S, and the [SEND] key on the
TS-590S control panel, are the method for transmitting audio input from the microphone
connected to the TS-590S, so even if these operations are implemented, audio input as
audio signals from ACC2 connector cannot be transmitted.
To transmit audio input as audio signals from the ACC2 connector, select one of the
following methods.
● Transmitting using the ARCP-590
With the ARCP-590, settings must be performed to transmit audio input from the ACC2
connector to use the on-screen [Send] button.
Select "Setup TX Control" from the ARCP-590 "Tool" menu. The "Setup TX Control"
window is displayed.
In this window, select "ACC2/USB" in the "Modulation Line ", and then select "ACC2".
For details, refer to the ARCP-590 help.
● Transmitting using the PKS terminal in the ACC2 connector
Audio input from the ACC2 connector can be transmitted by setting the PKS terminal in
the ACC2 connector on the rear of the TS-590S to low.
For details of the connector and terminal specifications, refer to the TS-590S instruction
manual.
● Transmitting using the PF keys allocated to the DATA SEND function
If the DATA SEND function has been allocated to the PF keys, operating the PF keys
enables audio input from the ACC2 connector to be transmitted.
For details, refer to "Allocating DATA SEND Function to PF Keys".
15