Kenwood TS-590S Setting Manual page 7

Software Operating
System
Run-time
ARHP-590
ARVP-10
LAN Broadband
environment router
Modem
Firewall
Internet Provider
environment
Proxy
Windows Vista (Service Pack 2 or later) (32-bit)
Windows 7 (Service Pack 1 or later) (32-bit or 64-bit)
Windows 8 (RTM or later) (32-bit or 64-bit)
Windows 8.1 (RTM or later) (32-bit or 64-bit) .
Microsoft .NET Framework 3.5
(includes .NET 2.0 and 3.0).
This software controls the transceivers. Refer to the
software help for the settings and operation methods.
Download the software from the download page, and
install it onto the PC.
http://www.kenwood.com/i/products/info/amateur/software_d
ownload.html
This software exchanges audio transmissions. Refer to the
software help for the settings and operation methods.
Download the software from the download page, and
install it onto the PC.
http://www.kenwood.com/i/products/info/amateur/software_d
ownload.html
To implement KNS operations via the internet, a model on
which port forwarding settings are possible using the
following protocol is required to transmit the data signals
that control the transceiver and audio. (See Note 1.)
Protocol: TCP; port No.: 50000 (ARHP-590 default value)
Protocol: UDP; port No.: 33500 (ARVP-10 default value)
Not specified.
To implement KNS operations via the internet, firewall
environments configured using in-house company
networks cannot be used. Use a home LAN environment.
To implement KNS operations via the internet:
・ A high-speed wired broadband environment using
xDSL, FTTH, or CATV network is required. (1Mbps
min. recommended.)
・ A global IP address is required. (See Note 2.)
・ The ability to use protocols and ports to transmit the
data signals that control the transceiver and audio is
required.
Protocol: TCP; port No.: 50000 (ARHP-590 default value)
Protocol: UDP; port No.: 33500 (ARVP-10 default value)
For details, contact your internet service provider.
A proxy server cannot be used.
6