Vfader Mode; Folder Change - Zaxcom Nomad User Manual

MAIN MENU

VFader Mode

VFader mode lets you choose to control the fader only or alternate between fader and trim controls for
the inputs that you chose to be active in the VFADER CYCLE.
When the virtual fader is active the bottom meter on the ENG Meter Screen will display what you will
be controlling. Either fader only or fader and trim for an input channel can be selected.
Virtual fader mode is only active while in the ENG meter Screen.
To control inputs 7 - 10
Press the MENU knob and the bottom meter on the ENG meter screen will display what input you
•
will be controlling with the MENU knob.
If the fader icon is displayed the MENU knob will adjust the mix for that input.
•
If the blue trim icon is displayed the MENU knob will control the input trim of that input.
•

Folder Change

Folder change allows Nomad to automatically change the mirror folder to follow the selected primary
folder. If AutoChange is selected and you change the primary folder the mirror folder will change to
the same folder.
Fader Icon
38
Trim Icon
Mode Menu