Synchronized Playback With The; Mk Ii - Korg AmkII Owner's Manual

Synchronized playback with the ER-1
By synchronizing the Electribe EA-1
sibilities. Here's how you can make the ER-1
EA-1 II.
mk
Use a MIDI cable to connect the MIDI OUT connector of the EA-1
the ER-1 II. Connect the part output jacks of the EA-1
mk
to your mixer or powered monitor system (amplified speakers).
1. Press the MIDI mode key to move to MIDI mode.
2. Use the cursor [L][M] keys to make the parameter select LEDs indicate MIDI CH[PART 1].
3. Set the EA-1 II channel to "01," and the ER-1
mk
(Refer to p.41 "Setting the MIDI channel of part 1.", "Setting the
MIDI channel of part 2.")
4. Press the Global mode key to move to Global mode.
5. Use the cursor [L][M] keys to make the parameter
select LEDs indicate CLOCK.
6. Set the EA-1 II to "int," and the ER-1
mk
(Refer to p.39 "Synchronizing the EA-1
ternal MIDI device.")
7. Press the Play/Pause key of the EA-1
pattern or song. (The Play/Pause key will light.) The
ER-1 II will play the pattern in synchronization
mk
with the tempo of the EA-1
If you want the EA-1
mk
the identically-numbered pattern in synchro-
nization, make the following settings.
• Synchronizing the ER-1
as master.(Set the EA-1
ER-1 II to "Ext.")
mk
• Set the EA-1 II and ER-1
mk
MIDI channel (for example, set both to
"01").
• On the EA-1 II and ER-1
mk
MIDI filter setting "P" to "O" (refer to p.42
"MIDI filter settings").
• On the ER-1 II, set the MIDI note num-
mk
ber setting to C-1...A-1 or A#8...G9. (This
will prevent the ER-1
sounded unintentionally when note-on
messages are received.
It is also easy to make the EA-1
in synchronization by connecting it to a se-
quencer or synthesizer that can transmit and
receive MIDI Clock messages.
II and ER-1
mk
II playback in synchronization with the tempo of the
mk
mk
II to "Ext."
mk
II with ex-
mk
II to start a
mk
II.
mk
II and ER-1 II to play
mk
II to the EA-1
II
mk mk
II to "int," and the
mk
II to the same
mk
II, set the
mk
II from being
mk
II playback
mk
3. Basic operation (Quick Start)
II
mk
II you can enjoy even greater performance pos-
mk
II to the MIDI IN connector of
mk
II and the line output jacks of the ER-1
mk
II channel to "10."
II
mk
21