Editing; Creating Repetitions Of The Same Phrase; Track Bouncing ("Ping-Pong" Recording) - Korg TRINITY HDR-TRI User Manual

portion of track has not been lost.)
When you are finished, press the [START/STOP] key.
9

Editing

Creating repetitions of the same phrase

Record using the procedure "Recording an audio track."
1
Access the Sequencer mode P5 tab 3 page (Atrk Edit).
2
In the Track setting, select the audio track that you wish to edit.
3
In the Start Measure field, specify the copy destination.
4
Press the page menu command "Copy Measure."
5
In the dialog box, make settings for Song, A.Track, and Measure Start/End to
6
specify the phrase that you wish to re-use, and then press the OK button.
The phrase of the area you specified here will be copied to the measure of the
track that you specified in step
Repeat steps
7
Press the [RESET] key to return the current location to the beginning of the song,
8
and then press the [START/STOP] key to listen to the playback.

Track bouncing ("ping-pong" recording)

Here's how to bounce (i.e., combine or "ping-pong") audio tracks 1, 2 and 3 to
audio track 4. Because the TRINITY can bounce tracks in the digital domain,
you can perform this operation any number of times without degrading signal
quality.
In the Sequencer mode, set Track to AT4(R).
1
In the Sequencer mode P1 tab 6 page (MixA1–4), set audio track 4 to a Volume of
2
0.
To be sure that audio track 4's volume stays at 0, set its Mix Audio Track Mode
to Manual.
In the Sequencer mode P1 tab 1 and 2 pages (Trk1–8, Trk9–16), set each MIDI
3
track's Track PLAY/MUTE/REC setting to MUTE.
3
4 2
4 .
– .
4 6
Editing
5
15