Changing The Password - Equinox Systems ESP-2 MI Installation Manual

To request a reinitialization:
1. Click Initialize from the Main Menu.
2. Click the Re-Initialize button.
After the reinitialization and reboot, the web interface will try to reconnect to the unit, using
the predefined IP address (192.1.1.1). If this fails, or if the web interface does not return within
30 seconds, direct your browser to the predefined IP address (192.1.1.1).
You may also reinitialize the ESP-2 MI using the INIT button on the front panel. See
Reinitializing and Resetting the Unit for more information.

Changing the Password

The Change Password window allows you to change the password.
To change the password:
1. Select Change Password from the Main Menu.
2. Enter the new 5-32 character password in the New Password fi eld. Passwords are case-
sensitive and can contain any alphanumeric characters.
3. Repeat the new password in the New Password (re-enter) fi eld.
4. Click the Apply button.
Verification will check that both password entries match and contain a valid number of
characters, then the EEPROM configuration will be updated. A reboot is not required. The
new password will be required the next time the ESP-2 MI web interface is accessed.
18
Equinox ESP-2 MI Serial Hub Installation Guide