Reverting To Factory Settings - AUDIOLINE DECT5500 Operating Instructions Manual

7.12 Reverting to factory settings

This function can be used to reset the handset and the base station to the factory
settings.
Factory settings:
Language: German
Low battery warning: On
Out of range warning: On
Button click: On
Speaker volume: 2
PIN Code: 0 0 0 0
Pause: 3 sec.
Dialling mode: DTMF/Tone
Notice: The phonebook, list of callers (CLIP), and all redial numbers will be deleted.
1. Press the menu button,
2. Use and
3. Use and
4. Enter the PIN number using the number buttons (factory setting, 0 0 0 0), then
press .
5. After a short pause, the factory settings will be reinstated. The display will revert to
the 'ready' state.
60
- Special Functions -
.
to select the SETUP menu, then press
to select the DEFAULT function, then press
Handset name: DECT5500
Take calls automatically: Off
Ring melody, external: 3
Ring melody, internal: 1
Handset ringing volume: 3
Base station ring melody: 1
Base station ringing volume: 3
FLASH time: 100ms
.
.