SmartLab walk User Manual page 9

After having set your personal weight, press „Disp/ Set" to confirm.
Setting step length:
After you entered your body weight, step length symbol flashes. Now you
can enter your step length by pressing the "M/" button. The step length
can vary between 30 and 120 cm. After having set your correct step
length, confirm with „Disp/ Set".
Setting signal tone:
After you entered your step length, you can set the device signal tone
( ). By pushing the "M/" button, you can choose if the signal beep is
activated ("ON") or not ("OFF"). Please confirm again with the „Disp/ Set"
button.
9