Mounting The Carrying Cord - SmartLab walk User Manual

Mounting the carrying cord

You can wear your smartLAB
® walk with the carrying cord included in the
set. To do so, you will have to connect the cord to the device by doing the
following steps:
Push the thin end of the cord through the two tiny eyes at the back side of
the device. Pushing together the cord a little bit makes it easier to squeeze
it through the eyes (pic. 1). After that, push the thicker end of the cord
through the loop on the thin end and pull it tight (pic. 2)
Pic. 1 Pic. 2
7