Advertisement
Laser Micrometers – Safety Considerations
Be sure to avoid direct exposure of human eyes to laser beams emitted from laser diodes. Even though barely visible
and/or invisible to the human eye, they can be quite harmful. In particular, avoid looking directly into a laser diode
or collimated beam along its optical axis when the diode is activated.
LaserLinc, Inc. certifies compliance with U.S. safety regulations (21 CFR Chapter I, Subchapter J) on laser products,
as stipulated by the U.S. Department of Health and Human Services. The LaserLinc, Inc. products shown here
correspond to the category "CLASS II LASER PRODUCT" in the regulation.
The following are warnings and graphic symbols that are adhered to the TLAserX30/X60/X120 scanners.
AVOID EXPOSURE - Laser radiation
D
is emitted from this aperature
D
CAUTION
LASER RADIATION - DO NOT STARE
INTO BEAM
Semiconductor Laser: 600-700nm
Maximum Output less than 1.0mW
Class II Laser Product
WAARSCHUWING
LASER STRALING – KIJK
NIET IN DE STRAAL
Halfgeleider Laser: 600-700nm
Maximum Vermogen Minder Dan 1,0mW
Klas II Laser Produkt
4
Advertisement
