Saeco Incanto sirius Operating Instructions Manual page 36

36 PROGRAMMING MACHINE FUNCTIONS
When this function is enabled, the internal
machine circuits will be rinsed immediately after
the warming-up phase to ensure that coffee is
prepared with fresh water only.
In all new appliances this function has already
been enabled in the factory.
This function allows you to change the display
language. You can choose among Italian,
German, Portuguese, Spanish, English, French,
Dutch, Polish and Swedish. The appliance is
usually programmed on the language of the
country in which it is sold.
The hardness of tap water may vary depending on
the region. For this reason, the appliance can be
set according to the water hardness in the place
where it is to be used, expressed on a scale of 1
to 4. The appliance is factory set on a hardness
value of 3.
The setting should be adjusted according to the
level of water hardness in the local area.
SETTINGS
CUP WARMER
RINSING
SETTINGS
LANGUAGE
Select the MENU. When the function ap-
pears, select it using
the "OK" button.
SETTINGS
CUP WARMER
RINSING
SETTINGS LANGUAGE
Select the MENU. When the function ap-
pears, select it using
the "OK" button.
SETTINGS
RINSING
LANGUAGE
WATER HARDNESS
Dip the strip in water for When the function ap-
1 second. pears, select it using the
Check how many squa- "OK" button.
res change colour.
RINSING RINSING
ON ON
OFF OFF
From this menu Press the "OK" button to
you can disable the confi rm your choice.
function.
LANGUAGE LANGUAGE
ENGLISH ENGLISH
ESPANOL ESPANOL
PORTUGUES PORTUGUES
Select the desired lan- Press the "OK" button to
guage. confi rm your choice.
WATER HARDNESS WATER HARDNESS
1 2 3 4 1 2 3 4
Select the corresponding hardness
(e.g. 2 squares = Hardness 2) and memorize the
value by pressing the "OK" button.