Iridium GO! User Manual page 33

To use GEOS service:
1) You must first register at www.geosalliance.com/iridium from your computer.
NOTE: To register, you will need your Iridium phone number and Iridium GO! IMEI (on the device label beneath the battery).
2) After registration, access SOS Settings, select Use, and enter the 5-digit authorization code
provided by GEOS, then Submit.
3) If successful, your SOS settings will appear, and the SOS action is set to Call and Message, for the
GEOS service.
4) You have the option to add additional message emergency contacts.
5) Once completed, store your SOS settings on the Iridium GO! device:
• For iOS: select Save
4
• For Android: navigate Back, then Save
To decline GEOS service and configure designated emergency contacts:
1) Select Do Not Use to decline GEOS Service.
2) Select SOS Action. The Call action enables an automatic phone call to your designated call
recipient when SOS is initiated from the Iridium GO! application. The Message action enables
automatic Emergency SMS alerts scheduled at five minute intervals until canceled.
3) Enter the number for your Call Recipient. It is important that the number is entered in the correct
international format with the international access code (+ or 00), country code, and phone
number for proper routing.
4) Enter the Message Recipient(s). Recipient can be entered as either an email address or a mobile
phone number in the correct international format.
28 Iridium GO! User Manual