Korg M3 User Manual page 14

MOTU - Digital Performer 5
1
Start up Digital Performer 5
2
Create an instrument track. Start up "M3 Plug-In Editor."
3
Create a MIDI track. Choose "M3 Plug-In Editor" as the output of that MIDI track.
4
To route the M3's audio signal to Digital Performer 5, create an audio track or an AUX
track. As the input of that track, select the audio interface input to which you've
connected the M3's audio signal.
5
If you're routing the M3's audio signal to an audio track, turn the REC button on so
that you can hear the audio signal.
If you are routing the M3's audio signal to an AUX track, this step is not necessary.
12