Korg M3 User Manual page 11

Apple - Logic Pro 7
1
Start up Logic Pro 7.
2
Create an audio instrument track, and start up "M3 Plug-In Editor."
3
To route the M3's audio signal into Logic Pro 7, create an audio track or an audio AUX
track. As the I/O source for that track, select the audio interface input to which you've
connected the M3's audio signal.
4
If you're routing the M3's audio signal to an audio track, turn the REC button on so
that you can hear the audio signal.
If you are routing the M3's audio signal to an audio AUX track, this setting is not
necessary.
9