Table of Contents
Advertisement
INSTALLING AND REMOVING THE HRAM
If
the
HORIZON, examine the contents of the carton to make
sure they match the packing slip. Check to see if
anything appears to be damaged due to shipping.
When handling the board, touch it only by the edges,
to avoid contact with the sensitive components (see
Figure 2-1). When laying the board down, place it on
a flat surface with the components facing up.
HRAM
The electronic components on the HRAM board
may be damaged by the static electricity
which often builds up in the human body.
Before touching the HRAM board, discharge
this electricity by touching a grounded
metal object, such as the chassis of a
Horizon which is plugged into the wall
outlet. Follow this procedure each time the
board is handled.
HRAM
was
WARNING
DO NOT REMOVE THE COVER FROM THE HORIZON
UNTIL THE POWER IS OFF, THE FAN HAS
STOPPED, AND THE RED INDICATOR LIGHT ON THE
FRONT PANEL HAS COMPLETELY DIMMED. DO NOT
TURN THE POWER BACK ON UNTIL THE COVER HAS
BEEN REPLACED.
CAUTION
packaged
separately
Holding the HRAM
Figure 2-1
USER/TECHNICAL MANUAL
2
from
the
Advertisement
Table of Contents
