freightliner CENTURY CLASS S Driver Manual page 19

Return to
From Diagnostic
Idle Hours
Screen
SERVICE
INFORMATION AMT
SERVICE
INFORMATION AMT
12/17/2004
NOTE: Service information screens only appear if the service interval is set to MILES or HOURS in Setup Information.
Return to
From Service
Idle Hours
Information
Screen
SETUP
INFORMATION AMT
Go to Vehicle Information Screens
12/17/2004
•
call up information on mobile screens;
•
navigate from screen to screen;
•
set up the display;
•
record significant data.
Instruments and Controls Identification
Information
INTERVAL IS SET TO
XXXXX MILES AMT
Go to Set−up Information Screens
INTERVAL IS SET TO
XXXX HOURS
Go to Setup Information Screens
Fig. 2.9, ICU4M Service Information Screens
PUSH SET KEY TO
CHANGE SERVICE AMT
To more Setup Information
Fig. 2.10, ICU4M Setup Information Screens (for service intervals)
Distance prior to reaching the
set Service Interval
12345 MILES
TO NEXT SERVICE AMT
Time prior to reaching the
set Service Interval
1234 HOURS
AMT TO NEXT SERVICE AMT
SERVICE INTERVAL
S
OFF/ MILES /HOURS AMT
PUSH SET KEY TO
CHANGE SERVICE MI AMT
SERVICE INTERVAL
S
OFF/ MILES / HOURS AMT
PUSH SET KEY TO
CHANGE SERVICE HR AMT
The odometer is a seven-digit display with one deci-
mal point after the sixth digit, allowing it to display
tenths of miles (or kilometers). When first installed,
the odometer starts at 0.0 miles (or kilometers).
When replaced, the odometer starts again from 0.0.
Distance traveled beyond the
set Service Interval
SERVICE WAS DUE
OR
12345 MILES AGO AMT
R
Time accumulated beyond the
set Service Interval
SERVICE WAS DUE
OR
1234 HOURS AGO AMT
R
If Service Interval is set to MILES
INTERVAL XXXXX MILES
S
<−−LESS MORE−−> AMT
OR
If Service Interval is set to HOURS
INTERVAL XXXX HOURS
S
<−−LESS MORE−−> AMT
R
R
f040703
f040704
2.10