Boss Audio Systems MR762BRGB User Manual page 9

In A2DP mode, if the Bluetooth device of the Mobile Phone supports AVRCP, pressing the SRC button
will switch between the radio, disc, USB, CARD and A2DP. After entering A2DP mode again, it will
resume playback.
7. In BT mode, press T-M button to select the following mode:
PRE NUM:
1. Press "SELECT" button to enter the mode.
2. Press the "+" or "-" button to scroll through numbers. (On the right of the LCD there is a number, 0-9) It
supports up to 10.
3. Select the preset then press and hold "SELECT" button until the symbol "_" displays in the left of the
LCD.
4. Input the number which will be stored with the remote control, then press "SELECT" button to confirm.
5. If you want to dial a preset number, first select the number then Press "SELECT" button to execute the
dialing.
RECEIVED:
1. Select this mode and press "SELECT" button to enter the mode.
2. Press the "+" or "-" button to scroll through received numbers. (On the right of the LCD, every call
corresponds with a number, 0-9) It supports up to 10 calls.
DIALED:
1. Press "SELECT" to enter the mode.
2. Press the "+" or "-" button to scroll through dialed numbers. (On the right of the LCD, every call
corresponds with a number, 0-9) It supports up to 10 calls.
(Note: This function is only for check the numbers dialed by remote control.)
MISSED:
1. Press "SELECT" button to enter the mode.
2. Press the "+" or "-" button to scroll through missed calls. (On the right of the LCD, every call
corresponds with a number, 0-9) It supports up to 10 calls.
TALK 00:
Select to check the current volume of BT Phone, using the "+" or "-" button to adjust the volume
8