Refreshing Carpets - Hoover WH20400 Series User Manual

Refreshing carpets:
7
Place the microfiber pad
on the floor white side
facing up. Place steam
mop onto pad making sure
the entire pad covers the
floor head.
WARNING
!
Do not clean over floor electrical outlets.
Do not use steam cleaner or press the Steam
Trigger without water in the water tank.
8
With microfiber pad attached,
hook steam mop into the
front of the carpet glider
and push to clip into place.
Carpet glider should only
be used when refreshing
carpets.
!
When using on carpets, always ensure the
multi-surface microfiber pad and carpet
glider are properly attached to the Mop Head.
9
Select the Steam only
setting*.
*Varies per model
• IMPORTANT •
10
To recline the steam
mop place foot on floor
head and pull handle
backwards.
12