Mode Switches; Connections To The Controller; Other Connections And Peripherals - Mitsubishi Electric E1151 Installation Manual

2.2.1 Mode Switches

All mode switches must be in OFF position during operator panel use.
The mode switches should not be touched unless by qualified personell.

2.2.2 Connections to the Controller

For information about the cables to be used when connecting the operator panel to
the controller, please refer to the help file for the driver in question.

2.2.3 Other Connections and Peripherals

– Cables, peripheral equipment and accessories must be suitable for the application
and its environment. For further details or recommendations, please refer to the
supplier.
Caution
When using a compact flash card, do not remove the card when the busy
indicator is illuminated.
Mitsubishi Electric, MA00780C
Installation
11