5.2.4 How to load a transport wheelchair (PT-Universal)
Open backrest clamps
Align centrally and
move onto platforms
Without motor: tilt PT forwards
until clamps reach backrest
Engage clamp with backrest
and tighten knob slightly to
secure
(Adjust headrest)
With motor: gradually raise PT
on lifting frame (push button
„down") until clamps reach
backrest
Engage clamp with backrest
and tighten knob slightly to
secure
(Adjust headrest)
Retract the lifting frame (push
button „down")
30
Apply brakes (if fitted) to
transport chair wheels
Tilt PT back (into
balanced position), and
off you go