Acer Projector Gateway User Manual page 34

34
2 Enable your WLAN and select the access point labeled AcerProjector or
AcerProjectorXXXX to connect wirelessly. Connect the projector to your
LAN for a wired connection.
3 Open the Internet browser (see note). Click on Download Acer eDisplay
Management on the welcome page, and then click Run to launch the
Welcome to the Acer Projector Gateway Setup Wizard. The installation will
proceed automatically. Make sure the installation is complete.
Note: If you do not see the welcome page or cannot connect to
the wired network, please enter the Server IP address (the second
item listed under the Acer logo on the splash screen) into your
browser's address bar.
Note: Ensure that you have administrator-level permission on your
NB/PC so that you can install the software.
http://www.pureglare.com.au
Internet