Network Setup; Setting Up The Ap Mode - Acer Projector Gateway User Manual

22

Network Setup

•

Setting up the AP Mode

1 Connect the Wi-Fi adapter to the USB jack of the projector.
2 Adjust projector source to DLNA.
3 Press / to select Setup and press ENTER. The Network Settings page
displays.
4 Press / to select AP Mode.
5 Highlight Projector ID and press
Projector ID. If enabled, 4 digit random number will display on the upper-
left corner of the splash screen when your NB/PC is connected to the
projector.
6 If you would like to change the Projector SSID, highlight Projector SSID and
press to modify.
7 If you would like to secure wireless networks, highlight Security and press
/ to select a preferred scheme. For details on Security settings, please
see "Security settings".
8 After finishing adjustment, press Apply / Enter.
/ to decide if you want to enable
http://www.pureglare.com.au