Tire Terminology And Definitions - GMC Yukon 2012 Owner's Manual

10-54 Vehicle Care
Tire Terminology and
Definitions
Air Pressure The amount of
:
air inside the tire pressing
outward on each square inch
of the tire. Air pressure is
expressed in kPa (kilopascal)
or psi (pounds per square inch).
Accessory Weight
:
The combined weight of optional
accessories. Some examples of
optional accessories are
automatic transmission, power
steering, power brakes, power
windows, power seats, and air
conditioning.
Aspect Ratio The relationship
:
of a tire's height to its width.
Belt A rubber coated layer of
:
cords that is located between
the plies and the tread. Cords
may be made from steel or
other reinforcing materials.
Bead The tire bead contains
:
steel wires wrapped by steel
cords that hold the tire onto
the rim.
Bias Ply Tire A pneumatic tire
:
in which the plies are laid at
alternate angles less than
90 degrees to the centerline of
the tread.
Cold Tire Pressure
:
amount of air pressure in a tire,
measured in kPa (kilopascal)
or psi (pounds per square inch)
before a tire has built up heat
from driving. See Tire Pressure
on page 10 57.
Curb Weight The weight of a
:
motor vehicle with standard and
optional equipment including the
maximum capacity of fuel, oil,
and coolant, but without
passengers and cargo.
DOT Markings
molded into the sidewall of a
tire signifying that the tire is in
compliance with the U.S.
Department of Transportation
(DOT) Motor Vehicle Safety
Standards. The DOT code
includes the Tire Identification
Number (TIN), an alphanumeric
designator which can also
The
identify the tire manufacturer,
production plant, brand, and
date of production.
GVWR
Rating. See Vehicle Load Limits
on page 9 16.
GAWR FRT
Rating for the front axle. See
Vehicle Load Limits on
page 9 16.
GAWR RR
Rating for the rear axle. See
Vehicle Load Limits on
page 9 16.
A code
:
Gross Vehicle Weight
:
Gross Axle Weight
:
Gross Axle Weight
: