Installing the Main Unit in
a
TOYOTA Vehicle
Install by using parts attached to the vehicle. (Screws marked
*
are attached to the vehicle.)
Center Panel *2
J
*3
Figure 7
~---
Mounting bracket
(1 pair for the left and right
sides)
Note:
*2 Some panel openings are too small for the unit
depending on the vehicle type and model. In
such a case, trim the upper and lower sides of the
panel frame by about 0.5 to 1.5
mm so
the unit
can be inserted smoothly.
*3 If a hook on the installation bracket interferes
with the unit, bend and flatten it with a nipper or
similar tool.
Typical Mounting Brackets
Example 1
:0
~ ..... .....Jr--......_
....
Example 2
Example 3
Affix the screws to the. marks.
Vehicles other than NISSAN and TOYOTA
In some cases the center panel may require modification. (Trimming, filing, etc.)
NX509
61