Viewing The Entire Route On The Map (Fit-To-Screen); Watching The Simulation Ofthe Route; Enabling Safety Mode - Clarion NXS09 Owner's Manual & Installation Manual

3.5 Viewing the entire route on the map (Fit-to-Screen)
The map can be moved and scaled to show the whole line of the route. You do not need to
manipulate the map manually. The Plan on Map feature does it for you.
In Advanced mode you have the following options to enter Plan on Map:
Plan on Map
Plan on Map
83;.
• Via the Route Information screen: tap
riMeiili'i,
ESt
•
Via the Find menu: tap :.~~ii;
,
II '
• Via the Route Information screen using a shortcut: tap ' ' ' ' ,
In Simple mode the last option is available only.
Plan on Map
3.6 Watching the simulation of the route
This feature is available in Advanced mode only.
The procedure is explained starting from the Map screen.
El3; T
:,',T"
1. Tap the following buttons:
' L ,;,tlill;i,
·!k.
2. The Route menu appears. There are two ways of running the route simulation:
Fly Over
• Tap
the route.
to run the simulation at high speed to give you a quick overview of
Simulate
3.
• Tap to run the simulation at normal speed and with voice guidance
instructions announced. This option is for demonstration purposes, or for checking
difficult parts of the route in advance.
The simulation can be aborted any time by tapping
Ii.
3.7 Enabling Safety Mode
This feature is available in Advanced mode only.
Safety Mode disables the touch screen above 10 km/h (6 mph) to keep your attention on the road.
While driving, you will not be able to set a new destination or to change settings. The only screen
control that remains enabled is the gesture that puts you back on the Map screen.
The procedure is explained starting from the Map screen.
Tap the following buttons: .
NX509
41