Advertisement
Click the button to the left of "Install the software automatically
7
(Recommended), " and then click Next to install the driver.
When the driver's installed, the wizard announces the completion of
the installation process.
If the "Software installation" window appears after you click Next,
click Continue Anyway. If you can't continue, see "About Driver Signing
Options" to the right of this page.
If the "System Settings Change" window appears, click Yes to restart
Windows.
Click Finish.
8
Windows displays "Your new hardware is ready to use. "
If the Driver Setup window's still open, click its Close button.
9
Restart your computer.
10
Should you ever need to remove the JUNO-Di driver from your system,
the driver installer folder contains an uninstaller. You can hold onto
this file, or re-download the driver folder later should you need it.
Later in this booklet, we'll provide some further information
on using the JUNO-Di with a DAW. Click the button here to
jump to this section now if you like.
About Driver Signing Options
The Driver Signing window lets you select whether Windows should block
the installation of an unknown driver, warn you about it, or just install it.
In the Start menu, select Control Panel.
1
If you're in
2
•
Category View—
click Performance and Maintenance, and then
click System.
•
Classic View—
double-click System.
Click the Hardware tab, and then click Driver Signing.
3
Set "What action do you want Windows to take?" to
4
Click OK to close the Driver Signing window.
5
Click OK to close the System Properties window.
6
Return to the driver installation instructions earlier in this booklet.
7
Ignore
or Warn.
5
Advertisement
