4iiii Sportiiiis Quick Start Manual page 3

Sportiiiis Quickstart Manual
Click on the Zones tab. This is where you customize how the LEDs respond to the input
from ANT+ sensors
Example - Setting up a Zone workout:
In this example, we'll set up for a run with a target heart rate zone of 130-140 bpm.
a. Click and drag the Slider to the left of the target zone (center LED) and set the value to
130. (the number above the slider will change as you move your mouse) Repeat with
the slider to the right of the target zone, setting this to 140. (you'll notice if the value of
the slider you are controlling "bumps" into the value of an adjacent slider, the adjacent
slider's value will automatically be changed)
Version 1.0 (Jan 29, 2012)