Installing the Wireless Local Access Network (WLAN)
1.
Insert the WLAN card into its connector at a 45–degree angle into its slot.
2.
Tighten the screw to secure the WLAN card to the computer
3.
Connect the antenna cables to their respective connectors marked on the WLAN card.
4.
Install the:
a) base cover
b) battery
c) ExpressCard
d) SD Card
5.
Follow the procedures in
Removing the Heat-Sink Fan
1.
Follow the procedures in
2.
Remove the:
a) SD Card
b) ExpressCard
c) battery
d) base cover
3.
Disconnect the heat-sink fan cable.
4.
Remove the screws that secure the heat-sink fan to the computer.
24
After Working Inside Your Computer .
Before Working Inside Your Computer .