Advertisement
Quick Links
Advertisement
Related Manuals for Black & Decker FSMH1621S
Summary of Contents for Black & Decker FSMH1621S
- Page 1 FSMH1621S...
-
Page 5: Intended Use
(Original instructions) ENGLISH Intended use Attaching the hand held steam cleaner (Fig. C) Your Black & Decker steam mop has been designed for Holding the back of the steam mop body (9) Push the hand held steam cleaner (5) firmly into the steam mop sanitising and cleaning sealed hardwood, sealed laminate, body (9) until it clicks into place. - Page 6 ENGLISH (Original instructions) Note: Ensure the filler cap is firmly secured. Attaching the variable steam jet nozzle (Fig. L) Note: When not in use, the jug (18) may be clipped to the Press in the clips (30) on either side of the variable steam handle for convenient storage.
-
Page 7: Auto Select
(Original instructions) ENGLISH Caution! Never leave the steam mop in one spot on any Caution! Steam may continue to be produced for a short time surface for any period of time. Always place the steam mop after the trigger switch (3) is released, this is normal. Switch with the handle (10) in the upright position when stationary off and allow the unit to cool before removing any accessories. - Page 8 ENGLISH (Original instructions) Caution! It is important to monitor the water level in the water When you have finished using the steam mop, return the tank. To refill the water tank and continue to sanitise/clean, re- handle (10) to the upright position and turn it ‘OFF’ and turn the handle (10) to the upright position and turn the steam wait until the steam mop cools down.
-
Page 9: Technical Data
Check steps 5, then 1, then 2, then 3. Technical data The digital controls Check steps 4, then 5, then 1, then 2, then 3 go out during use. FSMH1621S (Type 1) The steam mop Check steps 7, then 8, then 9, then 5, then 3. stops producing Voltage steam during use. - Page 10 ENGLISH (Original instructions) Problem Step Possible solutions Refer to the assembly chapter of the manual The accessories for correct fitting instructions of all parts and keep falling off the accessories. unit. Refer to the assembly chapter of the manual Steam is escaping for correct fitting instructions of all parts and from unexpected accessories.
- Page 12 Australia Black & Decker (Australia) Pty. Ltd. Tel. 03-8720 5100 20 Fletcher Road, Mooroolbark, Fax 03-9727 5940 Victoria, 3138 New Zealand Black & Decker Tel. +64 9 259 1133 5 Te Apunga Place Fax +64 9 259 1122 Mt Wellington Auckland 1060 United Kingdom Black &...