Table of Contents
Advertisement
Record a video
1. Turn on the camera.
2. Tap
.
3. While recording, use the following actions:
- Freely zoom in or out.
- Tap
to pause the video recording.
4. To stop recording, tap
Camera and video settings
Before you take a photo or record a video, customise your camera settings.
1. Turn on the camera.
2. Tap
to customise your camera.
3. On the pop-up window, tap
settings. The available options vary depending on the mode used.
- GPS location info: Attach a GPS location tag to the photo.
- Exposure: This determines how much light the camera's sensor receives. For lowlight
situations, use a higher exposure.
- Color Effect: Select among various photo effects to suit your needs.
- Scene mode: Select your desired scene mode.
- White balance: Select an appropriate white balance, so images have a true-to-life colour
range. The settings are designed for specific lighting situations. These settings are similar to
the heat range for white-balance exposure in professional cameras.
- Image properties: Sharpen or blur the borders between objects; select an appropriate hue;
make colors more or less pronounced; adjust the brightness and contrast.
- Anti-flicker: Select a band to avoid the impacts on photos caused by flickers from lighting
sources.
- Restore defaults: Restore to default settings.
- Zero shutter delay: The ZSD (zero shutter delay) function helps you capture photos
immediately.
- Voice capture: Record the voice with the video.
- Face detection: Set the ideal exposure and clarity of faces.
- Self timer: Select a time span for shutter delay to take a self-portrait.
- Capture number: Set the number of continous shots.
- Picture size: Select from various standard sizes for your picture.
- ISO: An ISO value indicates the light sensitivity of your camera's imaging sensor. A high ISO
setting increases light sensitivity, but it can also add noise to the picture. Low values are for
stationary or brightly-lit objects. Higher values are for fast-moving or poorly-lit objects.
- Face beauty: Take a photo with lightened faces for gentler images.
- EIS: The EIS (Electronic Image Stabilization) function helps reduce blurring associated with the
motion of a camera during exposure.
- Microphone: Enable or disenable microphone while recording a video.
- Audio mode: Select an audio mode for your video.
- Time lapse interval: Set the time lapse interval to adjust the speed of your video output.
- Effects: Select the effects for your photos and videos.
- Video quality: Set the quality level for videos as this setting will affect your file size.
To improve GPS signals, avoid shooting in locations where the signal may be obstructed,
such as between buildings or in low-lying areas, or in poor weather conditions. Your
location may appear on your photos when you upload them to the Internet. To avoid this,
deactivate the GPS location info.
.
/
/
to switch among general settings, camera and video
User Manual
MultiPad PMP7380D3G_QUAD
17
Advertisement
Table of Contents
