Minolta pmn Instruction Manual page 38

Frame the picture as instructed
in "BASIC RECORDING
PROCEDURE", steps 4 and 5.
• The built-in flash does not operate in Burst
image capture.
Press and hold the shutter-
release button all the way down.
• The shutter will continuously release until
your finger is lifted from the shutter-release
button, or the maximum number of images
has been captured.
• The focus and exposure for the series are
determined when the shutter-release button
is pressed part-way down before the pictures
are taken.
- 37 -
BURST IMAGE CAPTURE