Konica Minolta Revio KD-510Z User Manual page 116

Installing software and downloading images
Notes
• The camera cannot be connected to your PC if no image data is recorded
on the built-in memory of the camera, or a card with an image data record
is not in the camera.
• When 2 memory cards are inserted in the camera, the Memory Priority will
be displayed (p.25, p.105).
• Image files can be copied to a hard disk or other media and deleted as
necessary. For details, refer to the instruction manual operating system in
use.
Please note that Konica will not be responsible for any loss resulting from
such operations.
• Always back up important data.
• The protect setting set with this camera is equivalent to the read-only
attribute of a file.
Please note that, if the attribute of a file is changed using a PC the protect
setting set with the camera will be disabled.
• Do not change the file name of image data saved on an SD Memory Card/
Multi-Media Card/Memory Stick using a PC or save files other than image
data taken by this camera. Images that have been altered or newly saved
on an SD Memory Card/Multi-Media Card/Memory Stick using a device
other than this camera will not only play back on the camera but may cause
the camera to malfunction when inserted.
• Do not format the SD Memory Card or Multi-Media Card or Memory Stick
using a PC. Data may become damaged.
• Before editing the image files, copy them to your PC hard disk.
116
(Cont'd)