Customizing The Camera - Konica Minolta Revio KD-510Z User Manual

Using the Set-up Menu

Customizing the camera

1) The shooting and flash mode settings (see page 38-39) assigned to each
and can be set to on or off respectively.
* You cannot set all settings to off. If you try to turn all settings to off, the camera
automatically turns "ON" the "AUTO" setting in the flash and shooting modes.
2) You may assign part of the exposure-adjustment to
balance switch function to
Setting the exposure compensation to "ON"
If button is pressed when taking a photograph, the exposure correction
adjustment bar will be displayed. Exposure can be corrected with
button. Press
compensation can be corrected in the range of ± 0.6 EV in 0.3 EV steps.
The compensation setting can be corrected in the range of ± 1.5 EV by
combining with "EXPOSURE" in the REC menu.
When the compensation setting of REC Menu (p.51) is + 0.9 EV, you can
adjust compensation between + 0.3 EV and + 1.5 EV.
Setting the white balance switch function to "ON"
You can select the white balance mode by pressing
press , the mode alters, and the selected mode is displayed on the
LCD monitor. For information on displayed icons and white balance modes,
see page 53.
3) You can engage AF/AE lock function in this feature.
Setting the AF-Lock to "ON"
If you press
half-way on page 34), the focus setting locks and the AF-lock icon appears
on the LCD monitor. The setting becomes effective even after you take a
shot.
* To cancel the AF-lock, turn the camera's power OFF or press the Zoom, MENU/
SET, , or PLAY button.
.
button again to make settings effective. Exposure
while activating focus lock (pressing the shutter button
(Cont'd)
, and part of white
or
. Each time you
107