Table of Contents
Advertisement
Introduction
Safety Notes
Icon Index
Working Mode
Focus Range
Flash Modes
Digital Zoom
Thumbnails
Self-timer
Movie Clip
Memory Card Inside
Battery Status
Image Size (Resolution)
Image Quality
White Balance
AUTO
-
+
Exposure
Protected Image
Print (DPOF)
14
X4
X1
0
+
Preparation For Taking Pictures
How to Switch On Or Off The Camera
Safety Notes
To switch on the camera, slide the Power Switch to the side and
hold it for 1 second.
To switch off the camera, slide the Power Switch to the side and
hold it for 1 second again.
Loading the Batteries
This camera is using 2 x AA batteries.
1. Make sure the camera is switched off.
2. Open the Battery / Memory Card Cover.
3. Load the batteries into the battery chamber following the
polarity indications.
4. Close the Battery / Memory Card Cover.
Note
From the TFT LCD Monitor you can see the battery status shown below:
(
)
: Battery power full.
(
)
: Battery power half drained. Please prepare with new batteries.
(
)
: Battery drained. Replace the old batteries with new ones.
15
Advertisement
Table of Contents
