Konica Minolta KD-25 User Manual page 5

Important Safety Precautions
Caution
When taking a picture, wipe off the flash surface and
be careful not to cover the flash.
If the flash surface is dirty or you take a shot with the flash
covered, it is possible for the flash surface quality or color
to change, due to the high temperature of the flash.
Check that the polarity is correct when inserting
batteries.
The battery may heat, damage or leak if the polarity is not
correct, possibly causing skin burns and/or personal
injury as a result.
Do not use batteries which have become soiled with oil
or sweat.
If soiled, wipe the contacts with a dry cloth before use.
When cleaning or carrying out non-photographic
operations on the camera, disconnect the AC adapter
for safety.
Do not leave the camera in locations such as:
A location exposed to direct sunlight or inside a car,
etc. where the temperature may become extremely high.
Fire and/or damage to the unit may occur.
Within the reach of children.
The strap may wrap around the neck causing strangulation,
or accessories such as batteries, Memory Card, etc. May
be swallowed.
Unstable surfaces such as on an unstable table or an
angled surface.
Camera dropping on the head or other body parts may not
only cause personal injury but malfunction of the unit as
well.
A location exposed to lampblack, steam, high
humidity, vdust or vibration.
If dust or liquid enters the camera or if the internal parts
are damaged by strong vibration, overheating, fire or
electrical shock may occur as a result.
8
Important Safety Precautions
Caution
Remove the batteries when the camera will not be
used for an extended period.
Do not use force when operating the camera.
The camera may become damaged, causing personal
injury as a result.
Do not rotate the camera when mounting on a tripod.
About battery fluid leakage
Should battery fluid leaks ever come into contact with
hands or clothing, wash immediately with water.
Loss of eyesight may occur if battery fluid enters the
eye. In such case, do not rub the eye. Immediately flush
the eye with water and seek medical attention.
About the LCD monitor
Due to the characteristics of liquid crystals, the brightness of
the LCD monitor may appear uneven with changes in
temperature, etc.
The LCD monitor has been developed using high-precision
engineering and is superior in sharpness and picture quality.
Due to the nature of liquid crystals, however, there may be
missing or constantly lit pixels on the monitor. This is not a
malfunction of the unit.
If the LCD monitor becomes damaged for some reason, take
care to prevent personal injury from broken glass, etc.
Furthermore, take care that liquid crystals do not touch the
skin or enter the eyes or mouth.
9