Adjustment - Samsung SDC-80 Service Manual

5. Adjustment

5-1. Camera Adjustment
5-1-1. Focus Adjustment
• Adjusting in the Photo Mode
1. Connect the camera and TV to video output cable. Turn on the power and set to the PC mode.
2. Aim the Main board at the focus chart placed 2.5 meters away and perpendicular to the center of the
lens.
3. Loose a fixing screw lightly positioned in front of a lever in the state of pulling back macro lever
toward °ƒ (counterclockwise at the front).
4. Turn the focus adjusting lever until a lever is in focus through the TV screen (not to move the macro
lever).
5. Tighten the fixing screw when the lever is in focus.
* In the Photo mode, the state of the focus may be difficult to check. If it isn't, you can adjust in Resume
mode or with program for adjustment after taking a photograph.
2.5 m
FOCUS CHART
(Focus Adjustment)
• Adjusting with Program for Adjustment
* If the program for adjustment is used, the 3 times magnified screen allows you exactly to adjust camera.
1. Connect the camera to TV and PC with video output cable and PC connecting cable. Turn on the power
and set to the PC mode.
2. Aim the Main board at the focus chart placed 2.5 meters away and perpendicular to the center of the
lens.
3. After running the program for adjustment on the PC to click the Focus Mode On button in the Camera
Adjustment mode.
4. Repeat step 3 through 5 of "Adjusting in the Photo Mode".
5. Click the Focus Mode On button and finish the program for adjustment.
Samsung Electronics
LENS
MAIN BOARD
Fixing screw
Focus Adjusting Lever
(Lens & Lever Position)
5-1