Palstar HF-AUTO RF NETWORK Technical Manual page 7

SAVING MEMORY LOCATIONS
TUNE the HF-AUTO using a low power FM or CW signal
l
MANUALLY tune L&C for best SWR while power applied
l
While power is still applied push red button to the right of the tuning
l
knob and hold for 2 seconds or more until the display says
"SETTINGS CHANGED"
Remove power and release the red button
l
The frequency is now saved
l
To return to AUTO MODE push left red button
l
DIVISIONS IN THE FREQUENCY BANDS FOR SETTINGS
FREQUENCY IN MHZ # OF SETTINGS SPACED
1.8 MHZ to 20 MHZ 51
3.5 MHZ to 4.0 MHZ 51
7.0 MHZ to 7.3 MHZ 36
10.1 MHZ to 10.150 MHZ 2
14.0 MHZ to 14.350 MHZ 18
18.068 MHZ to 18.168 MHZ 3
21.0 MHZ to 21.450 MHZ 5
24.890 MHZ to 24.990 MHZ 1
28.0 MHZ to 29.70 MHZ 51
50.0 MHZ to 54.0 MHZ 101
MARS FREQUENCY 707
FOR ALL TUNABLE FREQUENCIES FROM 1.8 - 30 MHZ, 40 MHZ
THROUGH 41 MHZ AND 50 MHZ TO 54 MHZ THERE ARE 1193
SUBDIVISIONS OR MEMORY POSITIONS.
Page 7
4 Khz
10 Khz
50 Khz
50 Khz
40 Khz
50 Khz
100 Khz
500 Khz
500 Khz
40 Khz
4 Khz to 500 Khz
REAR PANEL OF HF-AUTO
ANTENNA OUTPUTS
CHASSIS GROUND
WING-NUT
Page 6
TRANSCEIVER
14.200
OUTPUT
FIRMWARE UPDATE/
PROGRAM SWITCH
RS-232
DC INPUT
12 - 13.8
VDC
@ 4 AMPS
PALSTAR