Upgrading Your Pc Or Moving Your Card To Another Pc; Uninstallation - NComputing X350 User Manual

X350/X550 User Manual

Upgrading Your PC or Moving Your Card to Another PC

The registration process assigns your vSpace software license and X-series PCI card to
the specific host PC in which they are installed. If you change or upgrade multiple
components on your PC, such as the hard drive and operating system or if you move the
PCI card to another PC, you will need to re-assign your software license and card to the
new host PC configuration. When making such a change, simply repeat the online or
offline registration process. You can reassign your license in this way a maximum of two
additional times after your initial registration. If you exceed this limit you will need to
contact NComputing technical support.

Uninstallation

To uninstall the vSpace software, select "Uninstall vSpace" from the "Start" menu. Follow
the prompts and the vSpace software is removed from the host PC. You will be
prompted to restart the host PC to complete the process.
Page 25