Firmware Upgrade - Health O Meter Professional Digital Scale Wireless USB Station User Instructions

Firmware Upgrade

1. Run the IOGEAR 4-Port Wireless USB
Station Control Center
2. Select the GUWIP204 server that you want
to upgrade the firmware on. Next click on
the "Configure Server" icon.
4. Enter the Administrator Username
(default: admin) and Password (default:
admin) to login.
3. This will bring up the configuration page in
your web browser. Click "CONFIG"
Figure 21
5. Click on the "Maintenance" tab at the top.
Next click on the "Download New
Firmware". This will take you to the
IOGEAR website. Here you can check to
see if there is an upgraded firmware
available. If there is, download it and make
note of the files saved location.
6. Once you have downloaded the latest
firmware , click on the "Firmware
Upgrade" button.
Figure 22
23