Connecting To A Health O Meter - Health O Meter Professional Digital Scale Wireless USB Station User Instructions

Connecting to a Health o meter

Open the USB Station Utility. You should see the device name, GUWIP204, as well as the
attached Health o meter
Professional scale are already installed on your computer before attempting connection through
the Wireless USB Station.
1. Click on the "Silicon Labs-CP2102 USB
to UART Bridge Controller", then click
on the "Connect" icon. This serves as the
®
Health o meter Professional scale USB
device plug-in.
NOTE: Only one (1) PC is allowed to connect to the Health o meter
time.
®
Professional scale. Make sure the drivers for the Health o meter
Figure 18
Figure 19
®
Professional Digital Scale
2. Once connected you will see "Manually
Connected By Your Computer's Name".
21
®
®
Professional scale at a