Attach Table Stand To Dvd Home Theatre Unit - Philips HTS4600 User Manual

Connect portable media player
MP3
1
Connect a 3.5mm stereo audio cable
(supplied) from the MP3 LINK socket on
this unit to the phone socket on your
portable media player (such as MP3 player).
Note
•
To listen to the audio output from this connection,
press AUX / MP3 LINK repeatedly until 'MP3 LINK'
is displayed on the display panel.
Connect USB device
1
Connect the USB device to
socket on this unit.
Note
•
This DVD Home Theatre unit can only play/view
MP3, WMA, DivX (Ultra) or JPEG fi les that are
stored on such devices.
•
To listen to the audio output from this connection,
press USB.
16 EN
Downloaded From TheatreSystem-Manual.com Manuals
MP3 LINK
(USB)
Attach table stand to DVD
Home Theatre unit
1
Ensure all the required cables are
connected to this unit.
2
Attach the table stand to the rear of this
unit and slide it to the left to lock into
position.
• To remove the table stand, hold the
bottom of the stand and slide it to the
right.
A table stand
Note
•
Do not attach the table stand if you want to mount
this unit on the wall.
A