Mount the DVD Home
Theatre unit
Caution!
•
Risk of personal injury and damage to the unit.
1
Ensure all the required cables are
connected to this unit.
2
Remove the screws and detach the DVD
Home Theatre stand, then close the rear
cover.
3
Attach the supplied knobs to the rear of
this unit.
4
Position the supplied bracket on the wall,
drill the screw holes and insert the rubber
wall plugs (not supplied) into the holes.
Tips
•
To mount this DVD Home Theatre unit below your
TV, leave at least 10cm (4 inches) of space between
the TV and the bracket.
5
Secure the bracket onto the wall with the
screws (not supplied).
6
Hook the DVD Home Theatre unit À rmly
onto the mounted bracket. Slide the
knobs through the key holes and lock into
position.
EN
17