Table of Contents
Advertisement
INSTALLING AND REMOVING A MEMORY CARD
Always turn off the camera and confirm the indicator lamp is not lit before changing the
memory card, otherwise the card may be damaged, and data lost.
This camera has approximately 15 MB of internal storage so images can be recorded without a
memory card. For more memory capacity, an SD (Secure Digital) Memory Card or MultiMediaCard
can be inserted into the camera. When a card is inserted, images are saved on the card. For more
about memory cards, see page 108.
1. Slide the card-chamber door toward the
back of the camera to release the safety
catch. Open the door.
2. Insert the memory card all the way into
the card slot and then release. The card
should catch in the slot.
Insert the card so the face is toward the
back of the camera. Always push the card in
straight, never at an angle. Never force the
card. If the card does not fit, check that it is
orientated correctly. If a MultiMediaCard is
inserted incorrectly, it will lock, but the card
chamber door will not close.
18
Getting up and running
1
2
3. To eject a memory card, press the card into the slot and
release. The card can now be pulled out.
4. Close the card-chamber door
and slide it toward the camera
to engage the safety catch.
INTERNAL-MEMORY INDICATOR
The internal-memory indicator in the recording and playback modes indicates the cam-
era's internal memory is being used. When a memory card in inserted in the camera, the
internal memory cannot be used or accessed.
TURNING THE CAMERA ON
To turn the camera on, slide the lens cover open in the direction
indicated in the illustration. When the camera is initially turned on,
the date and time need to be set, see the following page. The
monitor may turn off for a few seconds while the flash charges
when the camera is turned on.
Slide the lens cover in the opposite direction to turn off the cam-
era. Always store and transport the camera with the lens cover
closed.
3
4
19
Hide quick links:
Advertisement
Table of Contents
