Table of Contents
Advertisement
E L E C T R O N I C S
Common Phone Commands (Examples)
• "Call John Smith"
• "Call John Smith mobile"
• "Dial 1 248 555 1212"
• "Redial"
Mute (Or Unmute) Microphone During Call
• During a call, press the "Mute" button on the Phone main screen to mute and unmute
the call.
Transfer Ongoing Call Between Handset And Vehicle
• During an on-going call, press the "Transfer" button on the Phone main screen to
transfer an on-going call between handset and vehicle.
Phonebook
The Uconnect
system will automatically sync your phonebook from your paired phone, if
®
this feature is supported by your phone. Phonebook contacts are updated each time that
the phone is connected. If your phone book entries do not appear, check the settings on
your phone. Some phones require you to enable this feature manually.
• Your phonebook can be browsed on the Uconnect
can only be done on your phone. To browse, press the "Phone" button on the
touchscreen, then the "Phonebook" button on the touchscreen.
Favorite phonebook entries can be saved as Favorites for quicker access. Favorites are
shown at the top of the main phone screen.
Voice Command Tips
• Speaking complete names (i.e; Call John Doe vs. Call John) will result in greater system
accuracy.
• You can "link" commands together for faster results. Say "Call John Doe, mobile," for
example.
• If you are listening to available voice command options, you do not have to listen to the
entire list. When you hear the command that you need, push the
steering wheel, wait for the beep and say your command.
Changing The Volume
• Start a dialogue by pushing the Phone button
- "Help".
• Use the radio VOLUME/MUTE rotary knob to adjust the volume to a comfortable level
while the Uconnect
is different than the audio system.
86
®
system is speaking. Please note the volume setting for Uconnect
®
system touchscreen, but editing
, then say a command for example
button on the
®
Advertisement
Table of Contents
